About

6s LED Pixel Systems, Clearwater, FL

Clearwater, Florida based 6S LED Pixel Systems builds a lightweight modular digital sign utilizing the 3'x5' 6S Full Flat panel which can be arrayed to display huge imaging. The 6S Half Flat can fill 5'x18" fill panel for in between(s) and underneath areas. The 6S Full Round is a curved panel for pole warming or stage legs, trussing and more. 

Designed to clip & hang from tent rails or truss, Integral & pin-in flyware allows easy hangs. Hangs on stands to nine feet tall from ground, for instance. Integral floor stand on 6S Ground Full Flat allows freestanding and kiosk operation and controller will autoplay or can be laptop driven thru a simple network cable.    Specifications: 6S Pixel Panels have 500+ RGB waterproof LEDs, 1" apart (body edge to body edge) 2" center to center and are DMX controlled using ethernet, with Artnet or sACN. They have a built-in 4 port gigabit switch built in, use CAT6or5 cables and connect easily to typical default network settings and more. High grayscale processing (12bit/ch) allows these panels to look better with greater image contrast, and 24bit color depth. Fonts are more easy to read from distances.

Displaying static & moving schedules or menus, advertisements & commercials, gorgeous color patterns, media playback from your laptop and more.  Ground Full Flat Panels can clamp edge to edge (mirroring) in an A-frame configuration with cloned displays or operated independently.

Connect 110V to portable power supplies, speaker-type (NL4) cable to the portable panel controller then add a suitable ethernet cable for your distance needs. Two Pixel Panels can operate on a 100' 16/2 extension, or up to five Half Flats. 

The 6S Pixel Panel weighs less than 60lbs, with portable  controller & NL4 connection cable. All panels fold flat to 5", and measure 3'x5' ~ 1m x 0.5m. Half Flats are 18" x 5' length. Panels edges will overlap to form continuous surface.

Be seen (...sorry...) with this VERY useful tool